← All posts

From the Studio

Designing for the Dark: Lighting a Coastal Home Without Disturbing the Coast

Florida's sea turtle nesting season ran through October 31 and returns in the spring, and the rules for beachfront lighting are really a lesson in good design. Here's how we light coastal homes beautifully without lighting up the beach.

By Ronny Esquenazi, Principal at Gridspec Lighting

Every year, from spring through the end of October, sea turtles come ashore along Florida's coastline to nest. According to the Florida Fish and Wildlife Conservation Commission (FWC), decorative lights on the coast should not go up until nesting season ends on October 31. This year’s season has just closed, and the next one starts in the spring, which makes the off-season the right moment to talk about something coastal property owners in South Florida deal with, and architects and builders should plan for: lighting a home near the water without lighting the beach.

It sounds like a constraint. In our experience, it is one of the best design briefs we get.

Why the beach has rules

Hatchling sea turtles find the ocean by orienting toward the brightest horizon. Artificial light visible from the beach can pull them the wrong way. FWC notes that lights visible from the beach can create a hazard for nesting and hatchling turtles, and that interior lights can quickly turn a turtle-friendly building into one that causes disorientations. That last point matters: it isn't only the landscape lighting. A glass-walled living room with a ceiling full of downlights is a light source too.

The state takes this seriously. Section 161.163 of the Florida Statutes directs the Department of Environmental Protection to designate nesting areas and to adopt guidelines for local government beachfront lighting regulations, and many coastal counties and municipalities have adopted their own ordinances. Coastal Construction Control Line and Environmental Resource permits can also require projects to avoid lighting impacts. The practical takeaway: the rules vary by jurisdiction, so lighting for a coastal property has to be checked against the local ordinance early, not after the fixtures are on site.

FWC's three principles, and why designers should like them

FWC boils beachfront lighting down to three ideas: keep it low, keep it long, and keep it shielded.

Low. Mount fixtures as low as practical for the task, and use the lowest output that does the job. This is simply good lighting design. Most outdoor spaces are over-lit, and a low, controlled pool of light reads as more refined than a floodlit facade.

Long. FWC recommends light at 560 nm or longer, which means amber, orange, or red, and the lowest-wattage amber LED that provides adequate light. Long-wavelength sources are the least disruptive to turtles. Pay attention to this when you specify: a fixture labeled warm white is not the same as a true amber source, and the difference is the entire point.

Shielded. Fixtures should be fully downward-directed, with the bulb or glowing lens hidden from the beach. Shielding is also what separates architectural lighting from glare. A light you can see is rarely a light that is working for you.

How we approach a coastal project

We treat compliance as a design input from the first sketch, not a retrofit:

1. Start with the ordinance. Confirm what the local jurisdiction requires before specifying anything on the seaward side of the property.

2. Light surfaces and paths, not the sky. Step lights, low bollards, and grazing light on hardscape give you wayfinding and atmosphere with almost no spill. Skip the uplighting that throws light into the sky and onto the sand.

3. Control the interior, too. Window-facing fixtures, dimming scenes, motorized blinds, and astronomical time clocks let the house go dark on the beach side at night without anyone thinking about it. This is where lighting control earns its place in a coastal home.

4. Specify the right sources. Amber-rated fixtures where the ordinance calls for them, tight optics and full cutoff everywhere else, and documentation the inspector can actually verify.

Better at night, for everyone

The result of designing this way is not a dim house. It is a calmer one: warm, low, and quiet, with the view of the water preserved instead of washed out by glare on the glass. A dark beach is also a better beach to look at.

If you are building or renovating near the coast, or working with a client who is, we would be glad to coordinate the lighting plan with your team early. It is much easier to design the dark than to correct it later.

Sources: Florida Fish and Wildlife Conservation Commission, Sea Turtle Lighting guidance (myfwc.com/wildlifehabitats/wildlife/sea-turtle/lighting/); Florida Statutes, section 161.163. Local requirements vary by county and municipality; confirm the current ordinance for your property.

— Ronny Esquenazi, Principal, Gridspec Lighting

This article is general information, not engineering, legal or other professional advice, and may not reflect current codes, products or pricing. Consult your project’s licensed professionals before relying on it. See our Terms of Use.

Have a project in mind?

Submit a Plan← Back to all posts