Notes from the studio — design thinking, technical standards, and what the data says about building value.

New · Guide
Florida's sea turtle nesting season ran through October 31 and returns in the spring. Here's how we light coastal homes beautifully without lighting up the beach.
Read the post →

New · Guide
Daylight saving time ended November 1, and our evenings got longer overnight. Here's what circadian research actually recommends for light at home — and how we design for it.
Read the post →

Controls
Smart dimming and scene control are won or lost before the drywall goes up. Here is what architects, designers, and builders should lock down at rough-in, starting with the neutral wire at the switch.
Read the post →

Dimming
"Dimmable" on a cut sheet only means the fixture can dim, not that it dims smoothly, silently, or without flicker you can feel. Here is what we put in the spec to make sure it does.
Read the post →

Outdoor & wet locations
Dry, damp, wet — and an IP rating that may not mean what the cut sheet implies. Here's how we specify exterior and bathroom lighting that survives South Florida's rain, humidity, and salt air.
Read the post →

Color quality
Two fixtures can both say "CRI 90" and make the same room look completely different. Here's what the number leaves out — and the three metrics we actually specify against.
Read the post →

Real estate
Buyers already discount tech companies for outdated infrastructure. The same logic is starting to show up in real estate — and the data on smart buildings shows exactly why.
Read the post →
Looking for fixtures?
See our Product Features: the DMF and WAC downlights we specify most, and where each one fits.
Product Features →