From the Studio
A 2-inch-tall IC housing, a 35° cutoff, and trimless options that spackle right to the aperture. Why WAC's Aether is our answer for Miami condos with almost no plenum.
By Ronny Esquenazi, Principal at Gridspec Lighting
Ask any electrician who works in Miami's high-rises what the hardest part of recessed lighting is, and you will hear the same answer: there is no room above the ceiling. Concrete slabs, ductwork, and low drop ceilings leave a few inches to work with, and a standard can simply doesn't fit. WAC Lighting's Aether family was designed for exactly that condition.
Gridspec represents WAC, and Aether is one of the lines we reach for most often in condo renovations. Here is what makes it work.
Aether comes in two main sizes. The 2-inch version has a 2-inch aperture and a housing just 2 inches tall. The 3.5-inch version has a 3.5-inch aperture and a 3.5-inch housing. WAC describes both as designed for tight plenum spaces.
The 2-inch housings include new-construction versions that are IC-rated and airtight, a Chicago Plenum version, and remodel housings for cutting into an existing ceiling. When a condo board won't let you open the slab and the plenum is a few inches deep, these are the details that decide whether recessed lighting is possible at all.
Both sizes use a 35° cutoff angle. In plain terms, the light source sits back far enough that you don't see a bright point when you look across the room. That matters in living spaces with low ceilings, where every downlight sits close to eye level.
Beam options on the 2-inch downlight run 17°, 24°, 40°, and 50°. The 3.5-inch downlight offers 25° and 45°. The 3.5-inch adjustable version adds 15°, 25°, and 50° beams with up to 30° of tilt for art, millwork, and feature walls.
Aether is offered with a visible trim or as a trimless fixture, which WAC says can be spackled directly up to the aperture so only the opening shows. Finishes include white, black, black/white, and a haze/white two-tone. On the 3.5-inch adjustable, there is also brushed nickel.
For designers, trimless Aether on a smooth plaster ceiling is about as quiet as recessed lighting gets.
WAC offers Aether in two color-quality versions: 85 CRI and 90 CRI. The 85 CRI models put out more light. For example, WAC lists the 2-inch downlight at up to roughly 1,300 lumens at 85 CRI and up to about 1,065 lumens at 90 CRI on the 15W housing. In residential work, we specify the 90 CRI versions. The extra lumens aren't worth flatter skin tones and dull wood, as we explained in CRI 90 Isn't a Spec.
Color temperatures run 2700K to 4000K. Input is universal 120–277V. Dimming varies by size. The 2-inch downlight dims to 5% on 0-10V or ELV/TRIAC. The 3.5-inch dims to 0% on 0-10V and to 5% on ELV. If deep, smooth dimming is a priority, 0-10V on the 3.5-inch is the stronger path, and the dimmer should be named in the spec. Our post on dimming and flicker explains why.
The downlight trims are wet-location listed, which covers showers and covered balconies. The 3.5-inch adjustable trim is damp-listed only, so it belongs indoors or under full cover. That distinction is exactly the kind of thing we check on submittals; see our guide to wet and damp location ratings. Aether is Title 24 JA8 compliant and carries a 5-year WAC warranty.
Condo renovations with concrete slabs and shallow drop ceilings.
Soffits and bulkheads where depth is limited.
Showers and baths with the wet-listed downlight trim.
Art and millwork with the 3.5-inch adjustable.
1. Measure the plenum first. The available depth decides between the 2-inch and 3.5-inch, and between new construction and remodel housings.
2. Choose 90 CRI. Accept the lumen trade-off and adjust spacing to suit.
3. Match the listing to the room. Wet-listed downlight trims in showers, damp-listed adjustables indoors.
4. Pick the control path. 0-10V where deep dimming matters, with the dimmer written into the schedule.
Both are small-aperture, high-design downlights. DMF's X Series leans on modularity and premium metal finishes. Aether's strength is its very shallow housing. On some projects, the plenum depth makes the choice for you.
Renovating a condo with a tight ceiling? Submit a plan for a free initial review, see our lighting design and specification services, or join our trade partner program.
Sources: WAC Lighting, Aether 2" Round Downlight Trim spec sheet (R2ARDT) (housing height, cutoff angle, lumens by CRI, beams, dimming, housings, wet listing); WAC Lighting, Aether 3.5" Round Downlight Trim spec sheet (R3ARDT) (beams, dimming, trimless option, finishes); WAC Lighting, Aether 3.5" Square Adjustable spec sheet (R3ASAT) (tilt, beams, damp listing, brushed nickel). Specifications change; confirm against the current WAC spec sheet.
— Ronny Esquenazi, Principal, Gridspec Lighting
This article is general information, not engineering, legal or other professional advice, and may not reflect current codes, products or pricing. Consult your project’s licensed professionals before relying on it. See our Terms of Use.