We design, measure, install and program blinds as part of your lighting, so one scene can set the whole room. Final platform and scope are selected for your project.
WHAT WE DO WITH DAYLIGHT
Most projects hand the windows to a separate trade. We plan them with the fixtures and controls, then measure, install and program them within the agreed scope. Every room is different, so recommendations start from your drawings, orientation and how the space is used.
01 · WHY IT'S LIGHTING
By day it is often the brightest source in the room; by night, a dark mirror. Blinds are the dimmer for daylight: they decide how much of it comes in.
What we plan
Daylight and electric light balanced room by room, so the fixtures are not fighting the sun
Blind pockets, power and keypads drawn on the same reflected ceiling plan as the fixtures
Scenes that set lights and blinds together for morning, evening and night
Reducing glare on screens, art and faces in rooms with large glass
Bring us in: at schematic design, so pockets and power are planned before drywall.
02 · OPTIONS & FABRICS
Chosen for how each room is used and how it should look. Available ranges are confirmed for each project.
Options
Roller blinds in sheer, light-filtering or room-darkening fabrics, exposed or in a pocket
Drapery on straight or curved tracks
Roman and cellular blinds where a softer look suits the room
Fabric openness trades view against privacy and glare. How dark a room gets depends on fabric, mounting and side gaps, not fabric alone.
03 · LUTRON & CRESTRON
We identify the right platform for each project, so blinds and lights can share keypads and scenes where the systems support it.
Platforms
Lutron shading, for whole-home systems or single rooms
Crestron shading, where Crestron runs the rest of the house
Keypads, scenes and schedules programmed together with the lighting
Best fit: the platform your lighting control already uses, confirmed during specification.
04 · SOUTH FLORIDA
South Florida glass brings glare and hard afternoon sun. A programmed scene can lower the blinds without anyone getting up.
What it solves
Glare on screens and faces in rooms with floor-to-ceiling glass
Bedrooms that get much darker at night, with a sheer that keeps the view by day
Evening privacy for living spaces, without closing every window
Ask about: schedules that move blinds with the time of day.
05 · POCKETS, MOUNTING & POWER
Pockets, mounting and power are construction decisions. Made late, they mean exposed hardware or compromises at the window.
What we coordinate
Pocket sizes and locations on the reflected ceiling plan
Inside, outside or ceiling mounting for each opening, shown on window elevations
Power or low-voltage at each blind, coordinated with your electrician
Final field measurements are confirmed before anything is fabricated.
ONE ROOM, FOUR SCENES · ILLUSTRATIVE
Illustrative programmed scenes, recalled from a keypad or a schedule. Automatic, sensor-based behavior applies only where the specified system includes it.
MORNING
Blinds up on the east glass, sheers down on the west, fixtures off or low.
AFTERNOON GLARE
West sheers lower to cut glare on the screen and faces, and accent light lifts the art wall.
ENTERTAINING
Sheers set to the view, pendants and cove dimmed warm, accents on the art.
NIGHT
Room-darkening blinds down, a low path light, everything else off with one press.
QUESTIONS
Yes, within the agreed scope. Final field measurements are confirmed before fabrication, then the blinds are installed and programmed with the lighting.
Room-darkening fabric helps, but how dark a room gets also depends on mounting, side gaps and the window itself. We tell you what to expect for each opening.
Often, but not always. We confirm compatibility with your Lutron or Crestron system during specification, before anything is ordered.
Before drywall. Pockets, blocking and power are far easier to plan at schematic design than to retrofit.
Yes. We call them blinds; many people say motorized shades, smart shades or window treatments. It is the same product: roller, drapery, Roman or cellular, motorized and programmed with your lighting on Lutron or Crestron.
HOW A BLINDS PROJECT RUNS
One team for blinds and lighting. Within the agreed scope we measure, install and program, so fabrics, power and controls are coordinated from the start.
STEP 1
A floor plan or elevations with window sizes, plus how each room is used and when it gets direct sun.
STEP 2
We typically respond within one business day to clarify scope and next steps. Deliverables, pricing, and timing are confirmed after review.
STEP 3
We select fabrics and mounting, confirm field measurements before fabrication and track lead times against your schedule.
STEP 4
Blinds installed, limits set and scenes programmed with your lighting, then support on the terms agreed in your proposal.