From the Studio
Up to roughly 2,600 lumens from a 4-inch aperture, field-changeable beams, a 30° shielding angle, and a 3000K-to-1800K dim-to-warm option. Why WAC's FQ is our pick for double-height spaces.
By Ronny Esquenazi, Principal at Gridspec Lighting
South Florida architecture loves volume: double-height living rooms, lobby ceilings, retail spaces with exposed structure. Those spaces look spectacular in a rendering and are surprisingly hard to light. A residential downlight that's perfect at 9 feet barely reaches the floor from 18 feet. WAC Lighting's FQ 4-inch downlight is built for that problem.
Gridspec represents WAC, and FQ is one of the fixtures we specify when the ceiling height outgrows ordinary recessed lighting.
FQ is offered at 13W, 19W, 25W, and 28W. At the top of the range, WAC lists up to about 2,370 lumens at 2700K and up to about 2,645 lumens at 4000K, all at 90 CRI. That's a lot of light from a 4-inch opening, which keeps a tall ceiling from turning into a field of large holes.
Color temperatures include 2700K, 3000K, 3500K, and 4000K, so the same fixture family can serve a warm residential great room or a crisper retail floor.
FQ also comes in a dim-to-warm version that shifts from 3000K at full output toward 1800K as it dims, the candlelit glow people associate with incandescent light. WAC rates that version at up to about 1,300 lumens on the 19W model, so it suits residential great rooms and restaurants better than the tallest commercial ceilings.
In a double-height living room, that's the difference between a space that feels like a lobby at night and one that feels like a home.
This is where FQ stands out for designers. The beam angle is field-changeable using reflectors supplied with the fixture, so the spread can be tuned after installation once the furniture and art are in place. WAC designed FQ around a 30° shielding angle for visual comfort, which matters when people look up at a tall ceiling.
Each fixture accepts one lens or glare-control accessory from WAC's list: honeycomb louver, cross louver, spread lens, beam-elongating lens, or colored lens. A honeycomb louver over a dining table or a beam-elongating lens to graze a tall wall can solve a problem the layout alone can't.
The trim is two-piece die-cast aluminum with an aluminum heat sink. The light engine mounts to the trim with springs for easy replacement, which matters on a ceiling you need a lift to reach. WAC rates it at 50,000 hours.
FQ comes round or square, trimmed or trimless, in white, black, dark bronze, or a haze/white two-tone. WAC lists wall-wash versions as well. Housings include new construction (trimmed or trimless), framing kits, and remodel housings in both IC and non-IC versions.
Double-height living rooms and foyers in custom homes.
Lobbies and amenity spaces in condo buildings.
Retail and showrooms where output and beam control sell the product.
Restaurants with tall ceilings, using the dim-to-warm version for evening service.
1. Start with the ceiling height. Ceiling height sets the wattage and beam; we check it with photometric calculations, not guesswork.
2. Plan glare control up front. Louvers and lenses go on the schedule, not on a punch list.
3. Choose the control path early. Dimming performance depends on the driver and dimmer pairing, so we name both and test. See Dimmable Isn't Dimmed Well.
4. Confirm the listing. IC, non-IC, and location ratings get checked against the exact housing and trim on the submittal.
FQ rarely works alone. A common approach in a large home is FQ in the double-height spaces and a smaller-aperture fixture like WAC's Aether or DMF's M Series in the standard-height rooms, matched for color so the house reads as one design.
Lighting a tall space? Submit a plan for a free initial review, explore our lighting design and specification services, or join our trade partner program.
Sources: WAC Lighting, FQ 4" Downlight product page (wattages, lumens, CRI, CCTs, dim-to-warm range and output, field-changeable reflectors, 30° shielding angle, accessories, construction, light engine replacement, rated life, finishes, housings); FQ 4" Square Wall Wash Trimless listing (wall-wash version). Specifications change; confirm against the current WAC spec sheet.
— Ronny Esquenazi, Principal, Gridspec Lighting
This article is general information, not engineering, legal or other professional advice, and may not reflect current codes, products or pricing. Consult your project’s licensed professionals before relying on it. See our Terms of Use.